CST - Cosmologic Spatial Theory


The history of ‘Space Theory’ narrated in photos

* Click on photos to enlarge

The first experiment performed in Campinas–SP, was composed of three 20 litter water containers, one was made of glass and contained saltwater, and the other two were made of polyurethane – one of them had tap water with salt in the same salinity proportion of the seawater, where we monitored the variation of the liquid’s ‘density’. And the other had only tap water so we could compare it to the behavior of the ‘ionic solution’. Hand written notes in paper sheets.

(HeadQuarters nº1 => HQ1-Cps-1985-Brazil)

Using a precision graded belt, the stability of the glass container was checked for possible dilations due to temperature, which could in turn alter the volume of the liquid mass in its interior. A digital professional thermometer was also used; its thermocouple was put inside the thin tube in direct contact with the solution. All notes were written systematically every time the bell of a mechanical device was triggered (similar to an alarm clock).


A container with 20 Litters of the ionic solution and yellow dye was prepared to serve as a reference for another interesting experiment: it consisted on four 150ml bottles containing the same solution; all of them had 1ml pipettes attached to the nozzles. One container pointed towards East and another to West (horizontal). As for the two others, one pointed to North and the other to South (vertical). Systematic readings were performed during 30 days. At the same time, four other identical bottles were monitored, and each one of them had their pipettes horizontally oriented for better reference.


The extremely important experiment using the two containers; one of them facing upwards and the other facing downwards. This experiment was capable of “jeopardizing” the illusory force of gravitational attraction exerted by other celestial bodies upon the Earth, especially by the moon (Exp. 01 and 011).

What intrigued us the most is the fact that there is no experiment similar to this to be found in any scientific book to date.


Túlio in his in his haven in Belo Horizonte, spent most of his time reading, researching and analyzing that which had been done in the past by other scientists, that might have been responsible for the scientific concepts we still have nowadays. This place was called “Headquarters nº 2”.


Tulio theoretically considered as experiments of our predecessors, Plinio preparing new procedures (Setup’s) to repeat them. But this time, taking into account the existence of the ‘space’ as a “subtle fluid energy” that permeates everything. Therefore, confirm the errors of interpretation.


Given the lack of technical resources and/or financial, and know that we could not repeat experiments of the past in different ways, using a laboratory equipped for the physical city, which are perfect replicas of the originals. All this material was brought from Germany by the chief priest of the ‘Arnaldo College’ (AC) in Belo Horizonte/MG.


Among other important experiments, We analyzed the movements of ‘pendulum’ in the experiments of Joule and Foucault. By a torsion balance similar to that used by Cavendich, where he extracted the value of a constant, which was built by Isaac Newton in his formula of universal gravitation.


The systematic monitorações with manuals annotations every hour, and involve people (wife, children, secretaries etc.). Were very tiring! Especially during the nights. So Plinio designed and began construction of a ‘station gravimetric’ computer, able to perform and record the readings automatically. In the photo, tests and adjustments of electronic circuits that composed the ‘Hidrogravimetric’


A partial view of the first prototype in operation. Not only did the readings of the level of expansion of the ‘weight test’, as well as print the values in a small printer with date and time. Was used for scrap printers matrix of 132 columns, and the operations were controlled by an interface to a microprocessor-based Z80 (8 bit’s). The program (software) was developed entirely in ‘assembler’ (machine language).


Here is another partial view of the 1st prototype of the “Experimental Hidrogravímetro” as was baptized. A small printer-20 columns (initially), only recorded date, time and level of expansion of the net mass of 30 to 30 min. In this model, the data were still missing, should not be printed, and your virtual memory retia data only 24 hours past.


Another important experiment was to monitor changes (simultaneous) of 3 different liquid solutions, housed in tanks of equal volume (20.3 liters), one with distilled water (H2O), another with water + sodium (Na + H2O ) and the third with water + chlorine (Cl + H2O). The objective was whether there is a “villain” in the waters with the expansion (the tides).


Finally the “Hidrogravímetro” was ready in its final appearance. Was assembled from a rack of sound with the door Blindex smoke. Closed, reminds a “pulpit” … But beautiful!

To complete it, explained Plinio achieve stated a medical leave at work in São Paulo, and taking refuge in Brasilia in the house of his mother.


View from behind the ‘Hidrogravímetro’, which were housed the analog and digital electronic circuits, such as interfaces to control a 8 bit microprocessor, A/D converter and power sources… A “paraphernalia” of components! This version, transfer data automatically after 24 hours of readings to an external computer (Apple II), via serial port and writes to floppies!


Vision of the mechanism of search-level; car moving with a capacitive sensor. View burette graduated (special), and the mechanism for printing. Here, with a printer of 40 columns to contain the 10 variables provided in 30/30 minutes, date, time, level, pot. difference of, temperature (5) and atmospheric pressure.


View the location of the 1st ‘Station Gravity’ complete, dividing the living room of the apartment in Campinas/SP, where Plinio lived with his family (wife and two children). In the photo, you can see a dot matrix printer of 132 columns, a TRS-80, an Apple II, two driver’s of 5.1/4″… And the bottom, the ‘Hidrogravímetric’ – on him a notebook of annotations to control.


Opposite to the previous view, the ‘Hidrogravimetric’ in the foreground. The ‘Station’ remained operation 3 years (03/1987 to 07/1989). Then he was transferred to the business address, where Plinio and his staff could ascertain ‘Data’, monitor and guarantee the operation. The experimental set up to in work 02/1996, and generated over 2.000.000 of variables.


Graphics printed on 4 months of readings gravity fixed to a wall, giving the data readings in 60min/60min. Was added in these graphs, the variable distance of the Moon and Earth. Thus, you can view the best gravimetric variation in relation to thermodynamic factors, electrostatic, planetary and environmental.


When the construction was started this ‘station’, the most advanced personal computer that existed at the time was the Apple II (1985). Therefore, the ‘gravity’ was coupled to one of serial communication. + -80% Of data were recorded on floppy disks for 5 1/4″, printed on 94% of coils papael of 40 columns, and 6% lost for various reasons. An enormous effort has been the recovery and transfer of the ‘Database’ to a computer type IBM-PC.


View from the collection of disks of 5.1/4″ (single stage) with recordings of Software for the Apple II, and ‘Gravity Data.” The danger of these discs is the “vulnerability” to lose the information stored magnetically on them – as were years saved, many data were lost … It remains, only, the impressions in strips of paper, in which most were “saved” – Good!


Of luck, most of the gravity data were printed in bubinas of paper, then cut into strips, cut into A4 sheets and filed into folders AZ. When not managed to recover data from floppy disks, the only alternative was to enter via keyboard. Each 24 hours of lectures in 1635 numerical… There were dozens of hours typing “the days” manually …

(HQ1-Cps-1998 a 2000 e HQ3-UDI-2001 a 2002 – Brazil)

The amount of information (types and sources), the result of research, experiments, developments, ideas, intuitions, manuscripts, magazines, newspapers … Requires a proper cataloging! Thus, another complex task, that was separate collection, the main articles of theoretical development, which reissued would be part of the ‘Treatise’. Between cut sheets and rolls lined, were separated about 800 articles related to ‘Space’ (with ‘S’ capital), which support the ‘Cosmologic Space Theory ‘ (CST).

(HQ4-Udi-2003 – Brazil)

Not only long enough to finish typing and transfer the ‘Database'(BD) for the IBM-PC, had to ensure its integrity. The most convenient way to review them is creating graphics with MS-Excel … Were generated more than 350 spreadsheets. Worth it! Thus it was possible to eliminate the “Bugs” from entering, transferring, reading, writing etc..

This work was achieved thanks to the commitment and dedication of the current partner of Plinio.

(HQ4-Udi-2003 e 2004 – Brazil)

Other employees (paid or not) also helped in the typing of the ‘BD’, and manuscripts from the development of cut sheets and notebooks. Then the mathematical expressions (formulas or equations), the position of Mary and Plinio.

Most of the ‘Database’ can be found in Volume VII, and the development of articles in Volumes IV, V and VI of the Treatise.

(HQ1-Cps-1985 a 1999 e HQ4-Udi-2003 a 2005 – Brazil)

All drawings illustrate CST were prepared in amateur (yet) by Plinio, using only the MS-Word. In his charge were also the revisions and formatting of text and mathematical expressions, preparation and implement of experiments, acquisition of material and financial resources, and general coordination.

Plinio currently working on formatting the CST in the  portal  “”  on  the internet, and preparing the articles of ‘coverage’ for publication in journals of scientific dissemination, and assembly of the site in English (

(HQ3-Udi-2005 – Brazil

View of the assembly of the 12 files that compose the 7 volumes of Cosmologic Spatial Treatise, 3rd edition for review and record at the National Library in Rio de Janeiro/RJ – were printed more than 1,850 pages of documents, and articles, graphics and Database gravity … The result of over 25 years of work began to take form.

(HQ4-Udi-2005 – Brazil)

Vision of a ‘Meniscus’ negative (-) inside the glass tube. The ‘meniscus’ is caused by higher atmospheric pressure. The bottom is caused by the ‘Vector Gravitational’ (VG-) with direction from the center of the Earth, forming a curve “convex.” The ‘meniscus’ chisel is between a light fluid (oil) that isolates the atmosphere from the surface of the ” ionic solution”.

(HQ3-DF-2003 – Brazil)

Vision of a ‘Meniscus’ positive (+), which shows the ‘gravitational flow spatial’ is stronger in the center to the periphery of the Earth, where he finds the Hidrogravímetro. The (VG +) causes a “côncova” between the solutions. In this condition, the greater the evaporation of salty and fresh water, more expansion and raining hard. These are moments that can occur the earthquake or tsunami.

(HQ3-DF-2003 – Brazil)

Vision of a ‘Meniscus’ neutral (0), ie the amount of’ space ‘that penetrates the Earth is equal to the amount that comes out … Resulting in a ‘flow’ in balance, and form ‘meniscal’ is “straight.”

(HQ3-DF-2003 – Brazil)

Tulio (highest) and Plinio, a friendship of many decades, centuries, millennia … Who knows? But always together to complete a challenging task, which unfolds itself in the media. See the ‘purposes of this work’, and work as you can! Grateful!

(HQ2-BH-2001- Brazil)

*The End*